The 52-Watt AMBER LED Canopy Fixture luminaire is available with a shielded IES Type V distribution.
It is also certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.
The typical commercial applications for this product include:
Mounting heights of up to 12 feet can be used based on light level and uniformity requirements.
Low Profile Die Cast Aluminum Housing, ½" Coin Plugs with O-rings for Conduit or External Sensor. Built-in Sensor Housing with Color-Matched Polycarbonate Cover. A Clear Cover will be Provided When a Sensor is Ordered. Includes Full Baffle Required to Maintain FWC Certification.
CSA: Listed for Wet Locations, ANSI/UL 1598, 8750. (Damp Locations When Used with VNQM.); IP66 Sealed LED Compartment.
Textured Architectural Bronze or White Powdercoat Finish Over a Chromate Conversion Coating. Custom Colors Available Upon Request.
Molded UV-Resistant Acrylic Optical Lens Designed for Garage Lighting Applications.
Included Easy-Hang Bracket Fits Standard 4" Electrical Box, Allowing One-Person Installation. Optional Quick-Mount/Pendant Bracket Available.
Aluminum Boards
39w: Array: 39w, System: 43.4w; 52w: Array: 52w, System: 57.2w; (Up to 175w HID Equivalent)
Electronic Driver, 120-277V, 50/60Hz; Less Than 20% THD and PF>0.90. Standard Internal Surge Protection 6kV. 0-10V Dimming Standard for a Dimming Range of 100% to 10%; Dimming Source Current is 150 Microamps.
Fixtures Ordered with Factory-Installed Photocell or Motion Sensor Controls are Internally Wired for Switching and/or 1-10V Dimming Within the Housing. Remote Direct Wired Interface of 1-10V Dimming is Not Implied and May Not Be Available, Please Consult Factory.
Fixtures are Tested with LEPG Controls and May Not Function Properly With Controls Supplied By Others. Fixtures are NOT Designed for Use with Line Voltage Dimmers.
5-Year Warranty for -40°C to +50°C Environment.
For millions of years, female sea turtles have come ashore to lay their eggs on beaches. When the eggs hatched, the hatchling turtles were guided to the ocean.
They were led by an instinct to travel away from the dark silhouettes of the dune vegetation and toward the brightest horizon, which was the light from the sky reflecting off the ocean.
However, many coastal areas have become highly populated, and artificial lights have been added near the beaches. This artificial light deters female sea turtles from nesting and disorients hatchling sea turtles.
Rather than traveling towards the sea, the hatchlings travel inland toward the artificial lights. This causes them to die from dehydration, be preyed upon by fire ants and ghost crabs, or even get run over by cars on the road.
This disorientation from artificial lights has led to thousands of hatchling deaths in the state of Florida each year. It has also created a significant marine turtle conservation problem.
Statewide efforts have gathered information from disorientation reports and have used this to facilitate light management on nesting beaches and to research additional remedies for light-related threats.
Historically, low-pressure sodium-vapor (LPS) lighting has been used to deter sea turtles away from beaches. Since LPS sources are monochromatic, they give poor color rendition and utilize high amounts of energy.
In an effort to convert to LED while maintaining Florida’s guidelines for proper light wavelengths, NASA sought out EnviroLux Energy Systems to develop an Amber LED solution.
This solution would improve the quality of light without harming sea turtle migration and enable the management of thousands of fixtures through a wireless cloud for optimum energy savings.
For the past 28 years, EnviroLux Energy Systems has been a leader in energy-efficient lighting.